Skip to main content

Knowledge Center

Copy from other part - Article inspection template (MEASURETEMPLATE) application

Objective

Enable users to quickly populate a measurement template by copying setup data from an existing part.

Important

  • You must have access to the Article inspection template (MEASURETEMPLATE) application.

  • The Article inspection template (MEASURETEMPLATE) must be in Status 1 - Draft.

  • The part you want to copy from, must have a measurement template defined.

  • Copied templates include all measurement lines, tolerances and units.

  • Existing data in the target Product (ART) will be overwritten.

  • The function is useful for standardizing templates across similar parts.

Procedure - Copy from other part
  1. Navigate to the source Article inspection template (MEASURETEMPLATE) via the Measure menu (MSR) application:

    Navigate to the Measures menu (MSR) application and list templates

    Option 1: RamBase menuProductionDocumentationMeasurement templates

    Option 2: Click the Program field and type "MSR" and press ENTER, then click the Templates radio button.

  2. Click the link in the DOCID column to open the source measurement in the Article inspection template (MEASURETEMPLATE) application.

  3. In the Article inspection template (MEASURETEMPLATE) application, click the Copy from other Part icon, found in the top right corner of the header.

  4. A dialog box will appear. Locate the source Product (ART) with the template to be copied from.

  5. Once located, either click to highlight and then press ENTER, or double click to copy the source Article inspection template (MEASURETEMPLATE) to the destination Article inspection template (MEASURETEMPLATE).