[en] Knowledge Center

[en] St

[en] This column displays the current status of an operation.

[en] Id

[en] Displays the identifier number of the Planned operation (PLO).

[en] State

[en] This column displays the state of the operation, a text extension of the St column.

[en] Op No

[en] Displays the operation sequence number in the Production structure (KITDOC).

[en] Resource name

[en] Displays name of the Production resource (RESCONFIG) or the Resource group (REGCONFIG) that is assigned to the Operation (OPR) included in the Production work order (PWO).

[en] Tasklist

[en] Displays the Production resource (RESCONFIG) identifier. Click the View icon to view all tasks assigned to the Production resource in the Operators list of work order operations (RWOO) application.

[en] Operation

[en] Displays the name of the Operation (OPR) set in the Product structure (KITART) or Production structure (KITDOC).

[en] Planned

[en] Displays the total planned time of Setup, Processing and Cleanup set in the Operation (OPR).

[en] Hover over to display details.

[en] Logged

[en] Displays the total logged time of Setup, Processing and Cleanup. The time is logged by the operator in the Work order operation worklog (WOO) application.

[en] Remaining

[en] Displays the difference between Planned and Logged time and is calculated as the remaining time.

[en] Man hours

[en] If Man hours is enabled on the Production resource (RESCONFIG), the logged time is displayed.

[en] Time deviation

[en] Displays the Time deviation in percent.

[en] The value is calculated: (Accrued time - Planned time) * 100/planned time.

[en] Click the View icon to open the Worklog Deviation Details popup where details are displayed.

[en] Deviations can also be inspected and/or approved by clicking Approve button in the popup.

[en] Cost deviation

[en] Displays the Cost deviation in hours.

[en] Indicates that there is a deviation between accrued and planned cost and that the deviation is larger than the difference between approved cost value and planned cost.

[en] Click the View icon to open the Cost Deviation Approval popup where details are displayed.

[en] Deviations can also be inspected and/or approved by clicking Approve button in the popup.

[en] Planned start

[en] The planned date of production start in the format YYYY.MM.DD.

[en] Is operation locked

[en] Will display either Yes or No, based on the selection made in the States area.

[en] Critical date

[en] Critical date is a latest possible start date of the operation to complete it by the planned end date. Is displayed in the format YYYY.MM.DD.

[en] Estimated end

[en] Displays the estimated end date of production in the format YYYY.MM.DD.

[en] Ready

[en] Displays the date of when the Work order operation (WOO) is set, by the operator, in Status 3 - Ready for start. The information is displayed in the format YYYY.MM.DD.

[en] Started

[en] Displays the date of when the operation is started in the Work order operation (WOO) application, by the operator, and set in either Status 4 - Changeover setup or Status 5 - Processing.

[en] Finished

[en] Displays the date of when the operation was finished. This is done by the operator in the Work order operation (WOO) application when the Work order operation (WOO) is set in Status 9 - Completed.

[en] Delay

[en] Displays delay. Can be negative if the operation has been finished ahead of time. Shows the difference between estimated end and critical date.

[en] On hold to

[en] Displays the date and time the operator has set the Work order operation (WOO) to be on hold to. The information is reflected from the On hold to field, which the operator has available by clicking the Hold button in the Work order operation (WOO) application.

[en] On hold description

[en] Displays the description the operator has set in the Work order operation (WOO). The information is reflected from the Work order on hold description field, which the operator has available by clicking the Hold button in the Work order operation (WOO) application.

[en] On hold category

[en] Displays the category the operator has set in the Work order operation (WOO). The information is reflected from the Work order on hold reason field, which the operator has available by clicking the Hold button in the Work order operation (WOO) application.

[en] Latest operator

[en] Displays the name of the last operator who performed a Work order operation (WOO) on the Production work order (PWO)

[en] Is outsourced operation

[en] Displays either Yes or No.

[en] Outsourced purchase order item

[en] Displays the identifier of the outsourced Purchase order item (SPOITEM). Example: "SPO/123456".

[en] Click the View icon to open the Purchase order item (SPOITEM) application.

[en] This link can be used to quickly verify the Requirements and attachments sent to the supplier, which can be found in the tab with same name, in the Purchase order item (SPOITEM) application.

[en] Outsourced purchase order supplier

[en] Displays the name of the Supplier (SUP) for the materials.

[en] Click the View icon to open the Suppliers (SUP) application to view details.

[en] Worklog

[en] Click the View icon to open the Work order operation worklog popup where the user can inspect worklog related information for the operation. The user can efficiently add worklog elements for the operation.

[en] Icon

[en] Displays an icon that indicates the status of the production operation, if it is delayed or completed.

[en] Scheduled production task

[en] Displays an icon and a number. To view all pre-production, production and scheduled production tasks for linked to the operation, click the Scheduled production task icon. The number indicates the total number of tasks associated with the operation. The tasks are available for the operator in the Work order operation (WOO) application, in the Tasks tab.

[en] Click the Right arrow icon to open the Work order operation (WOO) application and to view details from the operator's perspective.