Skip to main content

[en] Knowledge Center

Wymiana przed produkcją

[en] A dummy product can be used in situations where it is undecided which product is to be used in the final production.

Podpowiedź

[en] The dummy Product (ART) is replaced before production starts.

[en] A dummy Product (ART) must be of the type = Z - non stock materials.

[en] A. Dummy product - Enable the Replace before production checkbox in Product (ART) application

  1. Naciśnij klawisz F12 i wybierz opcję Wymień produkt w strukturze.

  2. Spowoduje to otwarcie okna podręcznego, w którym możesz wybrać część, którą chcesz zastąpić fantomowy zapas. Po zakończeniu kliknij Potwierdź.

  3. [en] Enable the Replace before production checkbox.

    [en] Using this Product (ART) in the production will prompt a warning on the Production Work Order (PWO), a yellow flag with the text: "Needs material replacement to release".

[en] B. Replace the dummy product from the Production structure (KITDOC) in the Production work order (PWO) application

  1. [en] Select the Production work order (PWO) and press ENTER, or create the Production work order (PWO) from the Production work orders (PWOMENU) application.

  2. [en] In the Production work order (PWO) application, click on Structure button to open the Production structure (KITDOC) application.

  3. [en] In the Production structure (KITDOC) application, click on the dummy part to select it and press ENTER to open the PWO Structure Part Item popup.

  4. [en] Right click or press F12 and select the Replace product in structure option to open the Part select popup.

  5. [en] Either select or search for a part to replace the dummy product. When the part is selected, press ENTER.

  6. [en] Navigate back to the Production work order (PWO) application.

    [en] The dummy part with type = Z has now been replaced and the warning flag is gone. The Production work order (PWO) can now be released by clicking the Release button in the Actions area.

W tym rozdziale: